P&P Amplification
  • Français (French)
  • English

Power Attenuator Pro

Power Attenuator Pro
 Click on the magnifying glass to see the zoom 
Power Attenuator Pro
Reference : 035
The ultimate workstation for guitar players : power attenuation, live, recording, playing at home...
Specs :
Power attenuator 130w maximum
Multiple impedances 4 / 8 / 16 ohms
5 cab simulations with bypass
Load Box mode
Balanced output (XLR + jack + headphone)
1 input AMP, 1 output SPEAKER
The fan can be powered by a power supply (optional).

Product description
The Power Attenuator Pro keeps the technology we use from the others P&P products. Sound transparence and quality was our first objective when concepting it. This power attenuator will allow you to reduce the power of your amp until -30dB (6-positions : Off/-10dB/-15dB/-20dB/-25dB/-30dB, Off is a true bypass) on all 130w max power amplifiers (which mean 98% of the world guitar amplifiers production). A 80mm fan cools the entire efficiently. It is still self-powered and turn only when necessary, but you can also connect a power supply (6-12v) if you want to force it to run permanently.

The Power Attenuator Pro is a multi-impedance equipment (4 / 8 / 16 ohms).

The Power Attenuator PRO borrow to the Nocab its five cab simualtions on two balanced output (jack + XLR). These balanced outputs allow you to :
- Silent recording (if the "Mute" toggle swith is on) by connecting the Power Attenuator Pro to your recording system with an xlr or jack cable,
- Home playing with headphones while keeping your usual config (amp, effects...),
- Playing live by connecting the Power Attenuator Pro to your sound system.

A 6-position selector switch gives you the choice between five cab sims :
Off
Modern
Closed Back
Open Back
Tweed
Vintage
What are these simulations for? A speaker / cab doesn't reproduce all the frequencies emitted by the amplifier. Speaker simulators feature audio filters to reproduce the frequency range of a speaker, making the sound more realistic. The Power Attenuator Pro has 5 simulations allowing for a variety of sounds, from vintage to modern, from aerated to compressed.

Your neighbors are not musical ? You would like to easily control the volume of your amp ? You would like to obtain a crunch sound from your clean sound, but you don't have a master volume ? You want to record your guitar in silence? Play at home with headphones? Playing live without a mic in front of your amp?
Or you just want to obtain the best of your tubes ? Power Attenuator 100 was made for you !

Power Attenuator Pro requires no power supply. Like most of our products, it is hand wired point to point (no circuit board).

You'll find everything you need to connect it to your amp in the P&P Shop.

Dimension : 20*13*6cm
More information : www.plugandplay-amp.com/Pages/en/powepro.html
2 years warranty
New!
2020-12-31 289.00289.00
Adapter Jack // cable shoe (female)
Adapter Jack // cable shoe (female)
11.00
Adapter Jack // cable shoe (male)
Adapter Jack // cable shoe (male)
11.00
Speaker cable, 80cm
Speaker cable, 80cm
12.00
Speaker cable with angled connectors
Speaker cable with angled connectors
13.00
Connecting kit COMBO
Connecting kit COMBO
23.00
Connecting kit STACK
Connecting kit STACK
24.00
Male / Female cable
Male / Female cable
14.00
Optional 3-12v power supply
Optional 3-12v power supply
15.00